Pitching Machine Accessories

Bata Toggle Pitch Selector

This manual pitch selector allows you to feed fastballs and curveballs without the batter knowing which pitch is coming. Before feeding balls, the T-shaped Toggle Manual Pitch Selector is set to either side. Left for a fastball. Right for a curveballs. Two downhill feed chute extensions are connected to the in-feed chutes. Two balls are rolled down the feed chutes at the same time. The batter can see the balls roll down. Both balls appear (visible to the batter) just before the pitching wheels, but only one comes out. This feature makes it impossible for the batter to predict the pitch, but allows for ample timing of when the ball will be pitched.

Bata 2 Pitch Selector

The Pitch Selector attachment, when used with the 2Pitch machine and auto-feeder, randomly selects which pitch the 2Pitch machine will throw. It is calibrated to throw about 65% fastballs to 35% curves, in random patterns.

• Connects to the 2 Pitch
• Runs on 110 VAC
• Use with BATA feeder

Cordless Remote On/Off for AutoFeeders

Wireless on/off switch controls any electric auto feeder. Installs in minutes with no wiring needed.

• @120 VAC
• 1560W Resistive
• 960W Incandescant
• 100' range
• For indoor and outdoor use in temperatures from -20° F to 150° F

Power 1500 Battery Unit

The Power 1500 is an alternative power source for running your single wheel pitching machine, or any automatic ball feeder unit in locations where there are no electric outlets. You simply plug it into a regular 110-120 Volt wall socket to charge it, then take it anywhere portable power is needed. (Charger included.) Color may vary.

Pitching Machine Cover

The water-resistant pitching machine cover is blue vinyl, measuring 28" x 15" x 20", with tie-down grommets at the bottom. Fits easily over your pitching machine. Machine may be left outside in your batting cage as long as does not get wet.

Pitching Machine & Feeder Cover

The water-resistant pitching machine and feeder cover is blue vinyl, measuring 66" x 48" x 24", with tie-down grommets at the bottom. Fits easily over your pitching machine and auto-feeder. Machine and feeder may be left outside in your batting cage as long as they are not allowed to get wet.

Extend the Life of Your Pitching Machine

Although many of our pitching machines are capable of throwing real baseballs or softballs, consider using dimpled balls instead. These dimpled balls are designed specifically for use in pitching machines. They will dramatically extend the life of your pitching machine, your batting cage net, and your bats.

Zooka Pressure less Tennis Balls

• For ZS740 and ZS720 pitching machines
• Safe and soft, for young players
• Pressureless type, for longer life

Zooka External Battery Pack

For ZS740 and ZS720 pitching machines. Provides additional capacity for heavy duty pitching applications. It will power approximately 1000 pitches at 40 mph, or 600 pitches at 60 mph. Mounts on the standard tripod, protected and out of the way. Charger and mounting bracket included. Size: 8" x 4.5" x 7.5" - 11 pounds. Note: most users do not need the external battery

Zooka Short Panning Tripod

The shorter tripod allows a flatter trajectory crossing the plate. One tripod is included with the ZS740 and ZS720 pitching machines. The tripods are also sold separately.

• 24 inch pitching height
• For softball players or ages 5 to 9 years

Zooka Tall Panning Tripod

• For ZS740 and ZS720 pitching machines.
• 43 inch pitching height.
• For ages 8 and older.

Zooka ZS740 Replacement Battery

For ZS740 pitching machines only. With proper care, original battery should last 100,000 pitches. Replacement is needed only if current battery does not hold a charge.

Note: Please include the current battery's serial number to ensure you receive the correct replacement.

Zooka ZS720 Replacement Battery

For ZS720 pitching machines only. With proper care, original battery should last 100,000 pitches. Replacement is needed only if current battery does not hold a charge.

Note: Please include the current battery's serial number to ensure you receive the correct replacement.